Thursday, November 18, 2010

Inspiration Friday ....Lampshade Xmas Tree Tutorial

As Promised earlier this week ...I'm here to share How to Make your own Lamp Shade Christmas Tree ...for those of you odd balls like Abbey and I that want "DIFFERENT" ...!



Here's the wonderful Lamp Shade Christmas Tree in all it's glory ...and we're sure there are so many other ways to create and decorate your own ..as Abbey and I have had endless ideas on how to make these trees ...in different ways and different styles ...but since there's just 2 of us ...it would be fabulous to see all you sweet blogland chickadees make your own and then share with us pictures of your own take and design.
**************************************

So Here's What you need.....

Obviously some old Wire Framed Lamp Shades ....(if the shades are still covered that's ok too)

A Base of some kind ....(let your imagination come up with something unique from your junk pile)

3/8 inch Threaded rod which can be found in the Electrical Dept of your local home improvement store. ( Ours only came in a 10ft. length and we wanted a 6 ft length ..so the guys at the store were kind enough to cut it down to our desired size)

3/8 inch Nuts (locking nuts would probably be preferrable)...you'll need 2 per lamp shade...

So these are the basics and of course you may need some other goodies once you get started depending on how unique you get with your design.

******************************************









So First of all Abbey and I ...had this great Cast Iron base in our antique hardware drawer ...It had been waiting around to be used on just the right project ...and well finally the right project presented itself ....


Next ...we gathered (6) of our wire lamp shades all in different sizes ...the bottom ones were similar in size and the top ones of course smaller.





Here's a close up of what "threaded rod" is and how the nuts spin above and below the lamp shade center ...

Please keep in mind the threaded Rod is somewhat Flimsy ...so your tree will be slightly flexible when working with it.



Keep In mind ...with the rod one length and 6 shades and 6 ft of rod ...it's a process that takes a bit of patience ...Because you have to start spinning those fun little nuts into place...

1 nut spun towards the center ..then apply the lampshade ..then another nut spun down to the top of it ...then another nut on and into place then the shade and another nut on top of it ..and so the fun process goes. ( I mentioned locking nuts because these are another type of nut that locks in place unlike the type we used for our project ..Abbey and I think after fashioning our first tree that the locking nuts would have been the way to go... sot that the shades are held in place better...)

Once you have all your lamp shades in place and your base on .........




It's time to start covering that ugly threaded rod !!!

We opted for 3 inch wide strips of burlap that were about 6 ft. in length ..


We Tied off the burlap at the top ...and then started twisting it around the base ...then when we ran short we just tied the ends of the burlap lengths together and kept twisting it around the rod..... the knots just gave the center a wonderful old knarly look ....Plus because we used regular nuts the burlap helped secure the lamp shades in place better.
P.S. Originally as shown above we put the top shade facing down ... we later changed our mind ..and took it off ..then ran wire every which way between the frame ..so we could turn it into a nest. Then we re-fitted it on top with the open end facing up ..we filled it in with spanish moss ...and then added some Glittered birds to the top ....as shown in the finished Picture at the top.

****************************************

So that's it Bloggerettes ...it's really a rather simple process mixed with a bit of patience ...!

Abbey and I have never seen such a tree made ..so we think we finally came up with a fabulous unique design of our own ...However ..who knows ..maybe some Grandma ..in some small town of 15 somewhere ..we just don't know about ..has been creating lampshade Christmas trees since the 1960's ...ROFL !!
It's a Great Altered, Upcycled and Rustic Vintage Christmas Tree ...Perfect decorated in any color ..or any style ..and Oh my what a conversation piece for the holidays ..it's for all those relatives that just don't get us Vintage Junkies ...LOL !!!





Photobucket





22 comments:

  1. Hello my Sweet Friends,
    I am eager to make this one, however, it will probably have to wait three years until I get to it rofl....ya know with my ADD and all :) I definitely say this is ORIGINAL never seen it before and the Lord knows i have seen a lot of junk...this here is a treasure. Miss you lots, hope to see you soon.

    xo,
    Sheila

    ReplyDelete
  2. I luv all of the treasures in your booth and bueatiful vignettes! Thanks for sharing....Julian

    ReplyDelete
  3. ...oh my goodness is this an awesome idea!! What a way to feature those elegant oversized shades...the wheels are spinning now, thanks for the inspiration!!

    xo, Rosemary

    ReplyDelete
  4. Hi Sara, OMG!! This is just incredible...Would love this in my home!! What a beautiful tree...so many different things you could use to decorate it with! Hello to Miss Abbey and looking forward to seeing you girls at Chateau.
    ~Debbie~

    ReplyDelete
  5. OOOOOh love it. My next project I can see it.

    Sherri

    ReplyDelete
  6. OOOOOh love it. My next project I can see it.

    Sherri

    ReplyDelete
  7. This is pure junk heaven! What a clever and unique idea for re-purposing old shades. I am going to share this w/one of my junking friends who will probably create one of her own. Thanks so much for the idea!
    Visiting from Debra's party. :-)
    ~ Sue

    ReplyDelete
  8. Thank you for posting that tutorial. That tree has been on my mind since you showed it the other day.

    ReplyDelete
  9. I just love it! This could be used inside or outside, depending on what you hang on it. Lamp shades add to by list!

    ReplyDelete
  10. I will never look at a naked lampshade the same again. Pure inspiration. I just love the thinking out of the box. I am coming back to look at more of your blog for sure. Have a wonderful weekend and thanks for sharing.

    ReplyDelete
  11. I am in LOVE!!! thanks for sharing...you need to do a tutorial on your windows..hint..hint..I have to many and no inspiration!!!

    ReplyDelete
  12. I agree Sara, I've never seen anything like this, You two have really used your "thinking caps" on this one, it truly needs to be in a magazine. Thanks so much for sharing it with all of us. It's just amazing!!!
    big hugs,
    Debra

    ReplyDelete
  13. Thank You for sharing!!!
    Have an Ooh La La Weekend!!!

    ReplyDelete
  14. Love it when people think outside the box! This is a keeper for next year ~ thanks for sharing!

    ReplyDelete
  15. What an absolutely wonderful IDEA friend!! I may just have to try this myself!!! Thanks for sharing, I'm visiting from Common Ground & I love your blog!
    Smiles,
    Susie

    ReplyDelete
  16. Sara,
    Thank you so much for posting the tutorial on this precious idea. My friend Sandy had seen the tree in your booth & sent me a photo of it & told me all about how FABULOUS it was. Now you shared!!!! How sweet! Thank you!
    Charlene

    ReplyDelete
  17. Very creative idea! We can still make use of some old stuff aside from having a garage sale. A simple creativity is all we need ;)

    ReplyDelete
  18. I Love this so much and I finally found your blog so I could read how to make it
    Loved seeing you last weekend
    Have a Merry Christmas
    Blessings
    Pam
    Please stop by my blog and say hi too

    ReplyDelete
  19. I love your "shade" tree! This is so clever and fabulously junky! I've got a few in my basement, so I think next year I'll have a "new" tree in my house!

    Thanks for the inspiration and Merry Christmas!

    Kathy

    P.S. I saw your tree on JUNKMARKET Style.

    ReplyDelete
  20. This is absolutely lovely! I have several frames that I had been saving... didn't know what to do with and now I know! What a wonderful display stand this will make!
    Your blog is so interesting. I'm glad I found it. :)

    ReplyDelete
  21. I just love this! I saw some in an antique mall in Mackenzie Tennessee and made a few of my own that I use as garden sculptures. You have great style and very good directions.

    ReplyDelete

Thank you for stopping by and leaving a comment ..We love hearing from each and every one of you. We always try to get back to you .. via a reply in the comments section or back to your e-mail address if you have it enabled ...but if We don't... please know that we appreciate you leaving your thoughts.

Many Happy Returns of the Day ..Sara of Sweet Magnolia's Farm